This very annoying problem makes me unable to use my R9: Whenever i turn the wheel on, it gets some sort of input, the motor activates for a second, then shuts off. During this second, it does get connection to the pc. The fault is with the wheelbase however. I tried starting it without connecting it to the pc, same problem. It starts up normally, the led lights go on, they do their procedure, but when the motor kicks in and the constant force should be established, it just does this. Any ideas what to do? Hard to do anything on the software front, as i can have it connected and on to the pc for max a second or two.
Liquid error: translation data {:other=>"%{count} 人 "} can not be used with :count => 1. key 'one' is missing.
Pooky
This very annoying problem makes me unable to use my R9: Whenever i turn the wheel on, it gets some sort of input, the motor activates for a second, then shuts off. During this second, it does get connection to the pc. The fault is with the wheelbase however. I tried starting it without connecting it to the pc, same problem. It starts up normally, the led lights go on, they do their procedure, but when the motor kicks in and the constant force should be established, it just does this. Any ideas what to do? Hard to do anything on the software front, as i can have it connected and on to the pc for max a second or two.